"Based on the new technology concept, the company recently released a QVGA resolution (320 by 240 pixels) sensor with a pixel size of 30-microns on a side and quoted power efficiency of less than 10mW.
Because the sensor is able to detect the dynamics of a scene at the temporal resolution of few microseconds (approximately 10 usec) depending on the lighting conditions, the device can achieve the equivalent of 100,000 frames/sec.
In Chronocam’s vision sensor, the incident light intensity is not encoded in amounts of charge, voltage, or current but in the timing of pulses or pulse edges. This scheme allows each pixel to autonomously choose its own integration time. By shifting performance constraints from the voltage domain into the time domain, the dynamic range is no longer limited by the power supply rails.
Therefore, the maximum integration time is limited by the dark current (typically seconds) and the shortest integration time by the maximum achievable photocurrent and the sense node capacitance of the device (typically microseconds). Hence, a dynamic range of 120dB can be achieved with the Chronocam technology.
Due to the fact that the imager also reduces the redundancy in the video data transmitted, it also performs the equivalent of a 100x video compression on the image data on chip.
The company announced it had raised $15 million in funding from Intel Capital, along with iBionext, Robert Bosch Venture Capital GmbH, 360 Capital, CEAi and Renault Group."
From the company presentation at Event-based Vision Workshop 2017:
0 Response to "Chronocam in Novus Light"
Post a Comment